Technical Data
Standard Length: 3m or 6m
- Mass: 2.80kg/m
- Finish: Hot Dipped Galvanised.
- Loading Data: The support capacity of any concrete insert depends largely on the strength of the concrete used. Therefore, Atkore and Unistrut can not guarantee any particular load.
- Recommended Pullout Loading*: Inserts 300mm and over 8.83kN per 300mm.
- Factor of Safety; Approximately 3 Design load based on 34mpa concrete
- NOTE: Exercise care during installation – Do not bend lugs. Lugs at 100mm centres